PP332 - Act Technico PP332 CPU Board. 6U | Intel Pentium M...
- Part Number:
- PP332
- Model Number:
- PP332
- Make:
- ACT/TECHNICO
- Lead Time:
- Available
- Qty In Stock:
- Available
Act Technico PP332 CPU Board. 6U | Intel Pentium M | Single Board Computer Simple Type: CPU Board
The PP 332/02x-U is an entry-level PC-compatible, low power, high functionality, dual PMC CompactPCI board. Supporting either the 1.8 GHz Intel Pentium M processor 745 or the 1.4 GHz Intel Pentium M processor Low Voltage 738, the PP 332/02x-U will operate in a system slot or independently from the CompactPCI bus. High-performance networking is provided by four Gigabit Ethernet links, and the board is compliant to the PICMG 2.16 specification. Full system monitoring is provided by the PICMG 2.9 compliant IPMI interface. To simplify the board's integration many popular industry standard operating systems are supported. The PP 332/02x-U is suitable for a range of applications within the industrial control, telecomms, telemetry, scientific and aerospace markets. The PP 332/02x-U is the RoHS compliant version of the PP 332/02x family.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 1.8 GHz Intel Pentium M processor 745 or 1.4 GHz Intel Pentium M processor Low Voltage 738
- 2 Mbytes of secondary (L2) on-die cache
- 400 MHz Front Side Bus (FSB)
- 64 Kbytes of primary (L1) on-die cache
Specifications
- Compliance: compliant with PICMG 2.0 R3.0; 3.3V or 5V signaling levels: universal signaling support J4 connector not fitted 33/66 MHz;32/64-bit interface accessed via J1/J2 connectors utilizing a PCI-PCI Express bridge for off-board accesses PICMG 2.1 R2.0 Hot Swap Specification operates as a System Slot controller or in a Peripheral Slot option to disable CompactPCI interface (Satellite Mode): receives power from CompactPCI bus board can be hot swapped in this mode
- CPU: Two processor versions available 1.8 GHz Intel Pentium M processor 745: uses uFC-PGA 478 (micro Flip-Chip Pin Grid Array) package 1.4 GHz Intel Pentium M processor Low Voltage 738: uses uFC-BGA 479 (micro Flip-Chip Ball Grid Array) package Common Processor Features are: 64Kbytes of primary (L1) on-die cache 2Mbytes of secondary (L2) on-die cache 400MHz Front Side Bus (FSB) no CPU fan 1.6 GHz processor version (1 Mbyte L2 cache)availabe; utilizes 64-bit Intel 855GME chipset: supports 400 MHz bus frequency uses Intel 6300ESB I/O controller hub provision for ITP debug port
- Dimensions: supporting up to 2 Gbytes 333 MHz DDR ECC SDRAM: up to 2 Gbytes provided via two SODIMM sockets single bit error protection accessible from Intel Pentium M processor or CompactPCI bus
- Environment: operating temperatures: 0C to +55C (N-series: 1.8 GHz, 1.4 GHz) -25C to +70C (E-series: 1.4 GHz) -40C to +85C (K-series: 1.4 GHz) 10% to 90% Relative Humidity, non-condensing (operating): K-series includes humidity sealant -40C to +85C (storage) 10% to 90% Relative Humidity, non-condensing (storage)
- Ethernet: 4x channels supporting 10 Base-T, 100 Base-TX, 1000 Base-T: front panel implemented by 2x Intel 82541P1 via 32-bit 33MHz PCI bus rear panel implemented by Intel 82546GB via 64-bit 33/66 MHz PCI bus 2x channels accesssed via J3 and 2x channels via front panel RJ45 connectors: support for rear panel RJ45 connectors via Transition Module support for PICMG 2.16 R1.0- Packet Switched Backplane (PSB)
- Expansion Interface: +5V@3.5A (typical at 1.8 GHz with 512 Mbytes DRAM); +5%/-3% +3.3V@2.0A; +5%/-3% +12V@0.05A; -12V@0.05A +12V@ and -12V routed to PMC slots
- FDD: Phoenix BIOS comprehensive Power-On Self-Test(POST) LAN boot firmware included
- Form Factor: 1 Mbyte of BIOS Flash EPROM
- IDE Interface: EIDE Interface: supports up to Ultra-DMA 100 for high performance drives two channels (primary and secondary) secondary channel supports on-board CompactFlash site secondary channel supports on-board CompactFlash site secondary channel can be used for on-board 2.5inch disk drive (within a single slot); or, support for 1 or 2 CompactFlash or Microdrive Type II drives (in a single slot) primary channel is accessible via Transition Module on-board options use a PMC site
- Input: PICMG 2.9 R1.0 (System Management Specification): implements the IPMB0 interface implements the IPMB1 interface on-board Baseboard Management Controller Supports 8 Kbytes of non-volatile memory
- Memory: 6U form factor: 9.2 inches x 6.3 inches (233mm x 160mm) single-slot: 0.8inches (20.3 mm) connectors: IEC-1076-4-101 for J1-J5: shock: 20g, 11ms, 1/2 sine (operating) 30g, 11ms, 1/2 sine (non-operating) vibration: 5Hz-2000Hz at 2g, 0.38mm peak displacement(operating) 5Hz-2000Hz at 5g, 0.76mm peak displacment (non-operating)
- OS: PC-compliant Real Time Clock (Year 2000 compliant) watchdog timer system fan monitor; CPU temperature monitor; voltages monitor: all accessible via IPMI legacy speaker interface 3x USB (Universal Serial Bus 2.0) interfaces: 2 via front panel 1 via J5 Transition Module LPC (Low Pin Count) bus via J5 to enable AD PP5/001-U Transition Module to support: floppy disk interface parallel printer port interface (ECP, EPP, and IEEE1284)
- Power Connector: 2x PMC sites; for both sites: I/O via front panel I/O via J3 to J5 32/64-bit, 33/66 MHz PCI operation 3.3V signaling levels Transition Module provides rear I/O for both PMC sites
- SATA: PCB (PWB) manufactured with flammability rating of 94V-0
- Serial: up to 3x RS232 serial channels: 1 channel via an onboard header (serial cable supplied) 2 channels via optional Transition Module 16550 compatible UART's supports RI, CTS, RTS, DSR, DTR, and DCD
- Socket: support for Windows 2000, Windows XP, Windows XP Embedded, VxWorks, QNX and Linux
Applications
- None Available
Aliases
- None Available
Related Items
PP421
6U cPCI Dual-Core Intel® Xeon® 1.66MHz ULV processor Single Board
PP412
2.16 MHz Intel Core 2 Duo® 6U cPCI Single Board
PP410/03x
ACT Technico PP410/03x CPU Board. CompactPCI | 1.66 GHz Intel
PP310/011-E
Act Technico PP310/011-E CPU Board. Compact PCI | 1.1 GHz