PP310/011-E - Act Technico PP310/011-E CPU Board. Compact PCI | 1.1 GHz...
- Part Number:
- PP310/011-E
- Model Number:
- PP310/011-E
- Make:
- ACT/TECHNICO
- Lead Time:
- Available
- Qty In Stock:
- Available
Act Technico PP310/011-E CPU Board. Compact PCI | 1.1 GHz Intel Pentium M Processor | Extended Temperature | Intelligent Dual PMC Carrier | PICMG 2.16 Compliant Simple Type: CPU Board
The PP 310/01x is a PC-compatible high performance, high functionality, dual PMC CompactPCI board supporting the 1.6 GHz or 1.1 GHz Intel Pentium M processor. The PP310/01x will operate in a system slot, a peripheral slot or independently from the CompactPCI bus. High-performance networking is provided by two Gigabit Ethernet links, and the board is compliant to the PICMG 2.16 specification. Full system monitoring is provided by the PICMG 2.9 compliant IPMI interface. To simplify the board's integration many popular industry standard operating systems are supported. The PP 310/01x is suitable for a range of high-performance applications within the industrial control, telecomms, telemetry, scientific and aerospace markets. The board is plug compatible with the PP 110/01x family.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 1.1 GHz Intel Pentium M Processor: 64 Kbytes L1 cache | 1 Mbyte L2 cache | No CPU fan needed; low power processor
- 2 x 10/100/1000Mbps Ethernet interfaces
- 2 x PMC module interfaces (32/64-bit and 33/66 MHz)
- 32 Mbytes of Application Flash EPROM
- 512 Kbytes of BIOS Flash EPROM
- CompactPCI controller: operates in system slot or peripheral slot | 32/64-bit CompactPCI interface | 33/66 MHz operation
- Dual 1 Gbps Packet Switching Backplane (PICMG 2.16)
- Graphics interface
- High performance EIDE interfaces with optional on-board CompactFlashT interface
- IPMI (Intelligent Platform Management Interface): PICMG 2.9 (System Management Specification)
- Keyboard and Mouse interfaces
- Operation over ambient temperature range -25°C to +70°C
- Option to bypass CompactPCI bus (Satellite Mode)
- Optional Transition Module for rear panel I/O: 2 x RS232 channels, Parallel Printer Port, 2 x Ethernet, EIDE and Floppy Disk interfaces included
- Single slot (for all option combinations)
- Support for VxWorks, Windows NT, Windows 2000, Windows XP, Windows XP Embedded, QNX and Linux
- Up to 2 Gbytes of DDR DRAM (with ECC)
- Up to 3 x RS232 serial channel interfaces: 1 or 2 on-board | 2 on optional Transition Module
- Watchdog timer
Specifications
- Compliance: compliant with PICMG 2.0 R3.0; 3.3V or 5V signaling levels: universal signaling support 33/66 MHz; 32/64-bit interface accessed via J1/J2 connectors utilizing a PCI-PCI Bridge for off-board accesses operates as a system slot controller or in a peripheral slot PICMG 2.1 R2.0 Hot Swap Specification compatible option to disable CompactPCI Interface (Satellite Mode): receives power from CompactPCI bus board can be hot swapped in this mode J4 connector not fitted
- CPU: 1.1 GHz Intel Pentium M processor: 1.1 GHz uses uFC-BGA 479 (micro Flip-Chip Ball Grid Array) package 64 Kbytes primary (L1) on-die cache 1 Mbyte of secondary (L2) on-die cache 400 MHz Front Side Bus (FSB) no CPU fan utilizes 64-bit ServerWorks GC-LE chipset provision for ITP debug port
- Dimensions: supporting up to 2 Gbytes DDR ECC SDRAM: up to 2 Gbytes provided via two SODIMM sockets error correction up to 4 bits accessible from Intel Pentium M processor or CompactPCI bus
- Environment: -25C to +70C (operating) 10% to 90% Relative Humidity, non-condensing (operating) -40C to +70C (storage) 10% to 90% Relative Humidity, non-condensing (storage)
- Ethernet: implemented by Intel 82546EB LAN controller via 64-bit PCI bus two channels supporting 10 Base-T, 100 Base-TX, 1000 Base-T: support for PICMG 2.16 R1.0- Packet Switching Backplane (PSB) optional support for rear panel RJ-45's via Transition Module one channel switchable to front panel RJ45, supports 10 Base-T, 100 Base-TX, 1000 Base-T
- Expansion Interface: +5V@2.0A (typical at 1.1 GHz with 512 Mbytes DRAM); +5%/-3% +3.3V@6.5A; +5%/-3% +12V@0.01A; -12V@0.01A +12V and -12V routed to PMC expansion slots
- FDD: Phoenix Server BIOS comprehensive Power-On Self-Test (POST) LAN boot firmware included
- Form Factor: 32 Mbytes of Application Flash EPROM- 8-bits wide 512 Kbytes of BIOS Flash EPROM- 8-bits wide
- Gross Weight: implemented by a Silicon Motion SM722 providing: 8 Mbytes video memory resolutions up to 1280x1024; supporting up to 16M colors accessed via a 26-way high-density connector on front panel
- IDE Interface: EIDE Interface: supports up to Ultra-DMA 100 for high performance drives two channels (primary and secondary) primary channel is accessible via Transition Module Secondary channel can be used for on-board dual CompactFlash module
- Input: PICMG 2.9 R1.0 (System Management Specification) implements the IPMB0 interface on-board BMC (Baseboard Management Controller) supports 8 Kbytes of non-volatile memory
- Memory: 6U form factor: 9.2inches x 6.3inches (233mm x 160mm) single-slot: 0.8inches (20.3mm) connectors: IEC-1076-4-101 for J1-J5 shock: 20g, 11ms, 1/2 sine (operating) 30g, 11ms, 1/2 sine (non-operating) vibration: 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating) 5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)
- OS: keyboard and mouse interfaces accessed via a 26-way high-density connector or front panel PC-compatible Real Time Clock (Year 2000 compliant) watchdog timer system fan monitor; CPU temperature monitor; voltages monitor: all accessible via IPMI speaker interface 1 x USB (Universal Serial Bus) interface via J5 Transition Module 1x32-bit Long Duration Timer with processor interrupt capability LPC (Low Pin Count) bus via J5 to enable the AD PP5/001 Transition Module support for: floppy disk interface parallel printer port interface (ECP, EPP, and IEEE1284) 2x RS232 serial channels
- Power Connector: 2x PMC sites; for both sites: I/O via front panel I/O via J3 and J5 32/64-bit, 33/66 MHz PCI operation 3.3V or 5V signaling levels Transition Module provides rear I/O for both PMC sites
- SATA: PCB (PWB) manufactured with flammability rating of 94V-0
- Serial: up to 3x RS232 serial channels: 1 channel via a 26-way high-density connector on front panel either 1 channel via J5 or 2 channels via optional Transition Module 16550 compatible UART channels support: RI, CTS, RTS, DSR, DTR, and DCD
- Socket: Support for VxWorks, Windows NT, Windows XP, Windows XP Embedded, QNX and Linux
Applications
- None Available
Aliases
- None Available
