PP410/03x - ACT Technico PP410/03x CPU Board. CompactPCI | 1.66 GHz Intel...
- Part Number:
- PP410/03x
- Model Number:
- PP410/03x
- Make:
- ACT/TECHNICO
- Lead Time:
- Available
- Qty In Stock:
- Available
ACT Technico PP410/03x CPU Board. CompactPCI | 1.66 GHz Intel Core Duo processor L2400 | High-Performance SATA and EIDE Simple Type: CPU Board
The PP 410/03x is a PC-compatible high performance, high functionality, dual PMC CompactPCI board supporting the Intel Core Duo processor and the Intel E7520 server class chipset. The processors contain two CPU cores and a shared L2 cache. The PP 410/03x will operate in a system slot, a peripheral slot or independently from the CompactPCI bus. High-performance networking is provided by three Gigabit Ethernet links, and the board is compliant to the PICMG 2.16 specification. Full system monitoring is provided by the PICMG 2.9 compliant IPMI interface. Many suitable industry standard operating systems are supported. The PP 410/03x is suitable as an upgrade for most applications that are using the current popular PP 312/01x, PP 310/01x and PP 110/01x boards. The PP 410/03x is suitable for a range of high-performance applications within the industrial control, telecomms, telemetry, scientific and aerospace markets.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 1.66 GHz Intel CoreT Duo processor L2400
- 2 Mbytes of secondary (L2) on-die cache
- 2.0 GHz Intel CoreT Duo processor T2500
- 64 Kbytes of primary (L1) on-die cache
- 667 MHz Front Side Bus
- Dual-core CPU
Specifications
- Compliance: compliant with PICMG 2.0 R3.0; 3.3V or 5V signaling levels (universal signaling support) 33/66 MHz; 32/64-bit interface accessed via J1/J2 connectors PCI-X to PCI Bridge for off-board accesses J4 connector not fitted PICMG 2.1 R2.0 Hot Swap compliant operates as a System Slot controller or in a peripheral slot option to disable CompactPCI interface (Satellite Mode) recieves power from CompactPCI bus board can be hot swapped
- CPU: 20. GHz Intel Core Duo processor T2500: uses uFC-PGA 478 (micro Flip-Chip Pin Grid Array) Package 1.66 GHz Intel Core Duo processor L2400: uses uFC BGA-479 (micro Flip-Chip Ball Grid Array) package common processor features are: dual-core CPU (originally called Yonah) 667MHz Front Side Bus 64Kbytes of primary (L1) on-die cache 2 Mbytes of secondary (L2) on-die cache no CPU fan; low-power processor utilizes Intel E7520 server class chipset: supports dual channel DDR2-400 memory to give a peak bandwidth of 6.4 Gbytes/s uses Intel 6300ESB I/O Controller hub provision for XDP debug port
- Dimensions: supports up to 4 Gbytes DDR2-400 ECC SDRAM: up to 4 Gbytes via two SODIMM sockets up to four bit error correction accessible from Intel Core Duo processor or CompactPCI Bus
- Environment: operating temperature: 0C to +55C (N-series) -25C to +70C (E-series: 1.66 GHz) 10% to 90% Relative Humidity, non-condensing (operating) -40C to +85C (storage) 10% to 90% Relative Humidity, non-condensing (storage)
- Ethernet: 2x rear interfaces implemented by Intel 82573L controllers via x1 PCI Express links: support for PICMG 2.16 R1.0- Packet Switching Backplane (PSB) optional support for rear panel RJ45's via J3 front panel interface implemented by Intel 82573L, accessed via front panel RJ45 supports 10 Base-T, 100 Base-TX, 1000 Base-T
- Expansion Interface: +5V@TBDA;+5%/-3% +3.3V@TBDA; +5%/-3% +12V@TBDA; -12V@TBDA +12V and -12V routed to PMC slots
- FDD: Phoenix Server BIOS comprehensive Power-On Self-Test (POST) LAN boot firmware included
- Form Factor: 1Mbyte of BIOS Flash EPROM-8-bits wide
- Gross Weight: implemented by a Silicon Motion SM722: 8 Mbytes vidoo memory resolutions up to 1280x1024; supporting up to 16M colors analog graphics accessed via a 26-way high-density connector on front panel
- IDE Interface: 2x SATA-150 interfaces via J5 on-board EIDE interfaces: supports up to Ultra-DMA 100 on-board CompactFlash site under PMC site options for dual CompactFlash carrier or 2.5 inch disk drive assemblies (uses PMC site)
- Input: PICMG 2.9 R1.0 (System Management Specification): implements the IPMB0 interface implements the IPMB1 interface on-board Baseboard Management Controller supports 8Kbytes of non-volatile memory
- Memory: 6U form factor: 9.2inches x 6.3 inches (233mm x 160mm) single-slot: 0.8 inches (20.3mm) connectors: IEC-1076-4-101 for J1-J5 shock: 20g, 11ms, 1/2 sine (operating) 30g, 11ms, 1/2 sine (non-operating) vibration:5Hz-2000Hz at 2g, 0.38mm peak displacement (operating); 5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)
- OS: PC Real Time Clock (Year 2000 compliant) watchdog time 1x32-bit Long Duration Timer with processor interrupt capability system fan monitor; CPU temperature monitor; voltages monitor all accessible via IPMI legacy speaker interface 4xUSB 2.0 interfaces: 1 accessed via a 26-way high-density connector on front panel 3 interfaces accessed via J5 keyboard and mouse interfaces accessed via a 26-way high-density connector on front panel LPC (Low Pin Count) bus via J5 to enable the AD PP5/001 Transition Module support for: floppy disk interface parallel port interface (ECP, EPP, IEEE1284) 2xRS232 serial channels
- Power Connector: 2x PMC sites for PMC site 1: 32/64-bit, 33/66 MHz PCI operation 3.3V or 5V PCI signaling levels for PMC site 2: 32/64-bit, 33/66/100 MHz PCI/PCI-X operation 3.3V PCI signaling level XMC (PCI Express Mezzannine Card) interface supported via x8 PCI Express Link common features for both PMC sites: I/O via front panel and via J3/J5 Transition Modules support rear I/O
- SATA: PCM (PWB) manufactured with flammability rating of 94V-0
- Serial: up to 3x RS232 serial channels: 1 Tx/Rx channel accessed via a 26-way high-density connector on front panel 1 or 2 Tx/Rx channels via Transition Module 16550 compatible UART's front panel supports CTS and RTS, and rear panel supports RI, CTS, RTS, DSR, DTR, and DCD
- Socket: support for Linux, Windows 2000, Windows XP, Windows XP Embedded, Windows Server 2003 and QNX
- Storage Temperature: AC 97 interface via J5 codec on AD PP5/002 and AD PP5/003 Rear Transition Modules (RTM) independant legacy speaker output via J3
Applications
- None Available
Aliases
- None Available
