VP307 - Act Technico VP307 Concurrent Technologies 1.8 GHz Intel Pentium M...
- Part Number:
- VP307
- Model Number:
- VP307
- Make:
- ACT/TECHNICO
- Lead Time:
- Available
- Qty In Stock:
- Available
Act Technico VP307 Concurrent Technologies 1.8 GHz Intel Pentium M 745 based Single-Slot VME board VITA 31.1 Simple Type: CPU Board
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 1 x 32-bit Long Duration Timer with processor interrupt capability
- 1 x USB interface accessed via a USB connector on front panel
- 1 x USB interface via P2 connector
- 1.8 GHz Intel Pentium M processor 745
- 2 Mbytes of secondary (L2) on-die cache
- 2 x USB (Universal Serial Bus) interfaces
- 3 x General Purpose I/O bits via P2 connector
- 400 MHz Front Side Bus
- 512 Mbytes soldered on-board DRAM
- 64 Kbytes of primary (L1) on-die cache
- Accessible from Intel Pentium M processor 745 or VME bus
- error correction up to 4-bits
- Floppy disk interface via P2 connector
- ITP debug port
- Keyboard and mouse interfaces via a single PS/2T type connector on front panel and via P2 connector
- no CPU fan; low power processor
- PC-compatible Real Time Clock (Year 2000 compliant)
- Speaker interface via P2 connector
- Support for Linux, Windows NT, Windows 2000, Windows XP, Windows XP Embedded, RTX, VxWorks, QNX, Solaris and MS-DOS
- Supporting up to 1.5 Gbytes of DDR ECC SDRAM
- up to 1 Gbyte provided via a SODIMM socket
- Uses µFC-PGA 478 (micro Flip-Chip Pin Grid Array) package
- Utilizes 64-bit ServerWorks' GC-LE chipset
- Watchdog timer
Specifications
- CPU: 1.8 GHz Intel Pentium M processor 745: uses uFC-PGA 478 (Micro Flip-Chip pin grid array) package 400 MHz Front Side Bus 64 Kbytes of primary (L1) on-die cache 2 Mbytes of secondary (L2) on-die cache no CPU fan; low power processor 1.6 GHz and 1.1 GHz processor versions available utilizes 64-bit ServerWorks GC-LE chipset ITP debug port
- Dimensions: supported up to 1.5 Gbytes of DDR ECC SDRAM: 512 Mbytes soldered on board DRAM up to 1 Gbyte provided via a SODIMM socket error correction up to 4 bits accessible from Intel Pentium M processor 745 or VME bus
- Environment: 0C to +55C (operating) 10% to 90% Relative Humidity (operating non-condensing) -40C to +70C (storage) 10% to 90% Relative Humidity (storage non-condensing
- Ethernet: 2x channels supporting 10 Base-T, 100 Base-TX, 1000 Base-T: implemented by x2 Intel 82540EM controllers supports via P0 or P2 configuration options support for VITA 31.1 Gigabit ethernet on VME64x backplane 1x channel supporting 10 Base-T and 100 Base-TX: implemented by Intel 82551QM controller via front panel RJ45
- Expansion Interface: +5V@7.8A (typical with 1.8 GHz with 512 Mbytes DRAM) +12V@0A; -12V@0A +12V and -12V routed to PMC expansion slot
- FDD: Phoenix ServerBIOS comprehensive Power-On Self-Test (POST) LAN boot firmware included
- Form Factor: 512 Kbytes of BIOS flash EPROM- 8-bits wide 32 Mbytes of Application Flash
- Gross Weight: implemented by a Silicon Motion SM722 providing: 8 Mbytes video memory resolutions up to 1280x1024 supporting up to 16M colors analog VGA accessed via a 15-way high-density connector on front panel or via P2 connector
- IDE Interface: EIDE interface: supports up to Ultra-DMA 100 for high performance drives two channels (primary and secondary) primary channel is accessible via P2 connector connects to an optional hard/floppy/flash/CD-ROM drive board secondary channel can be used for on-board 2.5 inch disk drive or CompactFlash module or MicroDrive type II drive
- Memory: 6U form factor: 9.2 inches x 6.3inches (233mm x 160mm) single-slot: 0.8inches (20.3mm) shock: 20g, 11ms, 1/2 sine (operating) 30g, 11ms, 1/2 sine (non operating) vibration: 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating) 5Hz-2000Hz at 5g, 0.76mm peak diplacement (non-operating) utilizes a 160-way DIN connector for P1 and P2: compatible with normal 96-way DIN connectors optional P0 (for VME64x backplanes only)
- OS: keyboard and mouse interfaces via a single PS/2 type connector on front panel and via P2 connector floppy disk interface via P2 connector 2x USB (Universal Serial Bus) interfaces: 1x USB interface accessed via a USB connector on front panel 1x USB interface via P2 connector 3x General purpose I/O bits via P2 connector speaker interface via P2 connector PC-compatible Real Time Clock (Year 2000 compliant) watchdog timer 1x32-bit Long Duration Timer with processor interrupt capability
- Power Connector: 1x PMC slot with I/O via front panel and optionally P0: supports a 32/64-bit, 33/66 MHz PCI operation 3.3V or 5V PCI signaling expansion connector to a PMC carrier board, giving two extra PMC sites
- SATA: PCB (PWB) manufactured with flammability rating of 94V-0
- Serial: 2x asynchronous RS232/422/485 serial channels: 1x channel accessed via a RJ45 connector on the front panel 1x channel via P2 connector 16550 compatible UART's both channels can be user configured for RS232, RS422, or RS485
- Socket: support for Linux, VxWorks, Windows NT, Windows 2000, Windows XP Embedded, Windows XP, RTX, QNX, Solaris and MS-DOS
- Video Interface: implemented using Tundra Universe II device VME master/slave A32/A24/A16/D64/D32/D16/D8 (E0)/MBLT64 fast hardware byte swapping auto system controller detect full interrupter/interrupt handler support bus error interrupt hardware
Applications
- None Available
Aliases
- None Available