8751c - ACT Technico 8751c CPU Board with PowerQUICC II; MPC8270 ProcessorPMC;...
- Part Number:
- 8751c
- Model Number:
- 8751c
- Make:
- ACT/TECHNICO
- Lead Time:
- Available
- Qty In Stock:
- Available
ACT Technico 8751c CPU Board with PowerQUICC II; MPC8270 ProcessorPMC; PPC603e; FPU 32 bits RISC Architecture; 400/450 MHz Simple Type: CPU Board
IC-PQ2-PMCc PMC module is designed in accordance with IEEE1386 standard. It features a high performance 32 bits PowerPC processor with three Fast Ethernet controllers. A local co-processor takes in charge all communication functionalities unloading thus the PowerPC processor. IC-PQ2-PMCc can be used in conjunction with CompactPCI, VME carriers or proprietary design. Many networks or embedded applications can be developed on-board.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 128KB SRAM; 8, or 32 MB of Nor Flash EPROM; and 32KB SPI EEPROM
- Communication controller with Multi-Ethernet Links.
- Ethernet channels with redundancy.
- Low cost embedded application.
- On the debug connector: JTAG/COP and SMC1.
- On the rear I/O Pn4 and reverse Pn3 connectors :4*Multi-purpose serial controller SCC[1-4], 4 TDM with 128 HDLC channels, I²C bus (400Kbs), SPI and one RS232 serial port
- On the reverse Pn3, several general logical I/O.
- One asynchronous RS232 port routed on a front mini-
- Optional:Up to 1GB soldered Flash Disk, Reverse Pn3 to mezzanine board connection
- PCI interface Initiator, Target & Host:32 bits @ 33/66 MHz, 3.3V only PCI signaling Rev 2.2
- PPC603e with FPU 32 bits RISC architecture with :400/450 MHz, 16KB Instruction Cache and 16KB Data Cache, 24KB on-board fast dual-port SRAM,MMU and FPU capabilities, DMA-channel controllers
- Processor module with a need of high level of integration and low power consumption.
- Real Time clock and four 32 bit-timers
- Time of day Calendar clock
- Time stamping on the data flow, Traffic shaping
- Up to 256MB of shared SDRAM
- Up to three Ethernet 10/100TX auto-sensing ports are routed to the front panel RJ45 or Pn4 connector
Specifications
- Accessories: Engineering kit: RS232 serial link based on SMC UART JTAG- COP RS232 cable (mini-USB toward SubD9)
- DMA controller: 4 virtual independent channels 8,16,32 bits peripheral support Scatter/gather qith command/data chaining Transfers supported include: PCI, memory, internal I/O
- EM Compatibility: EMC/EMI: 89/336/ECC, EN55022 CIE, EN50082-2
- Environmental: Standard, extended, or rugged grade
- Ethernet: Ethernet Port Compliant with IEEE802.3, 802.3u, 802.3x 10/100BaseTX auto-sensing Surge protection
- Flash or EEprom: Up to 128 MB Mirror-NOR flash 32KB of EEPROM on the SPI bus Optional Nand Flash up to 1GB
- Other: Other on-board functions RS232 (SMC) Debug port available on a front mini-USB connector Temperature sensor usable via the SPI bus I2C bus, SCC signals and multipurpose I/O on PMC I/O On-board DC/DC generation Calendar clock and supercap for backuped SRAM 4 multi-purposes serial controllers SCC configurable as: asynchronous or synchronous serial ports 10MBs Ethernet channels TDM link at 2MBs with 128 HDLC channels with TSA capability These functionalities are provided with phy interface USB 1.1 on SCC4 (no transceiver on board)
- PCI Interface: 32-bit, 33/66 MHz PCI version 2.2 compatible Signalization 3.3VDC only Apoll of read and write buffers PCI host bridge and peripheral capabilities Monarch, Non-Monarch or stand-alone mode 4 independent DMA channels I2O standard
- Physical Characteristics: PMC module single width, IEEE P1386 compliant (150 mm * 75 mm)
- Power Requirement: 3.3VDC only with less than 3.5W for maximum configuration
- PowerPC Embedded Core: 630 MIPS and 11.5SPEC95@450MHz FPU, MMU, 16KB IC & 16KB ID 64 KB internal SRAM
- SDRAM: 64, 128, or 256 MB 64-bits wide Power management with self-refresh Fast access 10ns (6.1.1.1)
- SRAM: 128 KB
Applications
- None Available
Aliases
- None Available
