ACT/TECHNICO Industrial Partner

TVME3100-R - ACT/Technico TVME3100-R VMEbus CPU Board with 2eSST protocol, Freescale MPC8540...

larger image

Request Quote
For Price
Part Number:
TVME3100-R
Model Number:
TVME3100-R
Make:
ACT/TECHNICO
Lead Time:
Available
Qty In Stock:
Available

ACT/Technico TVME3100-R VMEbus CPU Board with 2eSST protocol, Freescale MPC8540 PowerQUICC III; PowerPC e500 core, 2x Gigabit Ports, Up to 512MB of DDR333, USB 2.0, Serial ATA Simple Type: CPU Board

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 2eSST VMEbus protocol with 320MB/s transfer rate across the VMEbus
  • Board support packages for VxWorks, LynxOS, and Linux
  • DMA engine
  • Dual 33/66/100MHz PMC-X
  • Freescale MPC8540 with PowerPC e500 processor core
  • PCI-X interface
  • Single VME slot even when fully configured with two PMC modules or one PMC module and an add-on memory mezzanine
  • Support for Processor PMCs (PrPMCs) and rear transition modules (RTM
  • Two Gigabit Ethernet ports and one 10/100BaseTX port
  • Up to 512MB of DDR333 ECC memory
  • USB 2.0 and Serial ATA controllers

Specifications

    General
  • [ASynchronous Serial Ports] Port 1: Async Baud Rate, bps max.: 38.4K EIA-232, 115Kbps raw
  • [ASynchronous Serial Ports] Port 1: Configuration: EIA-232 DTE (RxD, TxD, RTS, CTS)
  • [ASynchronous Serial Ports] Port 1: Connector: One front panel RJ-45
  • [ASynchronous Serial Ports] Port 1: Controller: MPC8540 Duart (second port N/C)
  • [ASynchronous Serial Ports] Port 1: Number of Ports: One 16550 compatible
  • [ASynchronous Serial Ports] Ports 2-5: Async Baud Rate, b/s max: 38.4K EIA-232, 115Kbps raw
  • [ASynchronous Serial Ports] Ports 2-5: Configuration: EIA-232 (RxD, TxD, RTS, CTS)
  • [ASynchronous Serial Ports] Ports 2-5: Connector: Via VMEbus P2 connector, pinout matching MVME721 RTM
  • [ASynchronous Serial Ports] Ports 2-5: Controller: Exar ST16C544D Quart
  • [ASynchronous Serial Ports] Ports 2-5: Number of Ports: Four 16550 compatible
  • [Counters/Timers] Cell Capacity Life: One year at 100% duty cycle, 25 C
  • [Counters/Timers] Cell Storage Life: 10 years at 25 C
  • [Counters/Timers] Real-Time Timers/Counters: Four, 32-bit programmable timers in PLD; four, 32-bit programmable/cascadable timers in MPC8540
  • [Counters/Timers] Removable Battery: Yes
  • [Counters/Timers] TOD Clock Device: Maxim DS1375 I2C device with battery backup
  • [Counters/Timers] Watchdog Timer: Internal to MPC8540. Second level time-out can generate reset.
  • [Dimensions] Depth: 160.0 mm (6.3 in.)
  • [Dimensions] Front Panel Height: 261.8 mm (10.3 in.)
  • [Dimensions] Height: 233.4 mm (9.2 in.)
  • [Dimensions] Max. Component Height: 14.8 mm (0.58 in.)
  • [Dimensions] Weight: 468 g/16.5 oz. (IEEE handles)
  • [Dimensions] Width: 19.8 mm (0.8 in.)
  • [Dual IEEE P1386.1 PCI Mezzanine Card Slots] Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors (PN4 for PMC1 only)
  • [Dual IEEE P1386.1 PCI Mezzanine Card Slots] Module Types: Two single-wide or one double-wide, front panel or P2 I/O, PMC and PrPMC support, PMC1 site Pn4 routed to VMEbus P2 connector rows A and C
  • [Dual IEEE P1386.1 PCI Mezzanine Card Slots] PCI Bus Clock: 33 MHz, 66 MHz or 100 MHz PCI/PCI-X
  • [Dual IEEE P1386.1 PCI Mezzanine Card Slots] Power: +3.3V, +5V, ±12V
  • [Dual IEEE P1386.1 PCI Mezzanine Card Slots] Signaling: 3.3V, 5V tolerant
  • [Ethernet Interface] Connector: One Gigabit Ethernet port routed to front panel RJ-45, one Gigabit Ethernet port and one 10/100 port routed to VMEbus P2 connector, pin out matching MVME721 RTM
  • [Ethernet Interface] Controller: MPC8540 Triple Speed (TSEC) and Fast (FEC) Ethernet Controllers
  • [Ethernet Interface] Indicators: Link status/speed/activity
  • [Ethernet Interface] Interface Speed: Two @ 10/100/1000Mbps (TSEC), one @ 10/100/Mbps (FEC)
  • [Flash Memory] Capacity: 64MB or 128MB soldered flash options
  • [Flash Memory] Type: Flash, on-board programmable
  • [Flash Memory] Write Protection: Hardware via switch, software via register or sector lock
  • [Main Memory] Capacity: Up to 512MB SODIMM
  • [Main Memory] Configurations: One single-bank module; 256MB or 512MB
  • [Main Memory] Speed: DDR333 (166 MHz)
  • [Main Memory] Type: Double data rate (DDR1) ECC SDRAM
  • [Non-Volatile Memory] Capacity: 128KB (available for users), 8KB base - board Vital Product Data (VPD)
  • [Non-Volatile Memory] Type: SEEPROM, on-board programmable
  • [PCI Expansion Connector for Interface to PMCSPAN Boards] Address/Data: A32/D32/D64
  • [PCI Expansion Connector for Interface to PMCSPAN Boards] Connector: One 114-pin connector located on MVME3100 planar, same location as on MVME5500 planar
  • [PCI Expansion Connector for Interface to PMCSPAN Boards] PCI Bus Clock: 33 MHz
  • [PCI Expansion Connector for Interface to PMCSPAN Boards] Power: +3.3V, +5V, ±12V
  • [PCI Expansion Connector for Interface to PMCSPAN Boards] Signaling: 5V
  • [Processor] Clock Frequency: 667 or 833 MHz On-chip
  • [Processor] L1 Cache (I/D): 32K/32K
  • [Processor] Microprocessor: Freescale MPC8540 PowerQUICC III – PowerPC e500 core
  • [Processor] On-chip L2 Cache: 256KB look-aside
  • [Serial ATA Interface] Configuration: 1.5Gbps/port, Legacy or DPA mode (switch-selected)
  • [Serial ATA Interface] Connectors: One routed to front panel, one header (+ power) on board top surface
  • [Serial ATA Interface] Controller: Intel G31244
  • [Serial ATA Interface] Indicators: Planar activity LEDs on board back side
  • [Serial ATA Interface] Number of Ports: Two
  • [USB Interface] Configuration: USB 2.0
  • [USB Interface] Connector: One powered port routed to front panel
  • [USB Interface] Controller: NEC µ720101
  • [USB Interface] Number of ports: One
  • [VMEBUS Interface] Arbiter: RR/PRI
  • [VMEBUS Interface] Compliance: ANSI/VITA 1-1994 VME64 (IEEE STD 1014), ANSI/VITA 1.1-1997 VME64 Extensions, VITA 1.5-199x 2eSST
  • [VMEBUS Interface] Controller: Tundra Tsi148 PCI-X to VMEbus bridge with support for VME64 and 2eSST protocols
  • [VMEBUS Interface] DTB Master: A16, A24, A32, A64; D08-D64, SCT, BLT, MBLT, 2eVME, 2eSST
  • [VMEBUS Interface] DTB Slave: A16, A24, A32, A64; D08-D64, SCT, BLT, MBLT, 2eVME, 2eSST, UAT
  • [VMEBUS Interface] Interrupt Handler/Generator: IRQ 1-7/Any one of seven IRQs
  • [VMEBUS Interface] Location Monitor: Two, LMA32
  • [VMEBUS Interface] System Controller: Yes, switchable or auto detect
  • Front Panel: IEEE handles, Connectors for serial, Gigabit Ethernet, USB, and SATA ports, Openings for PMC sites
  • Other Features: Jumper-less configuration, On-board temperature sensor (Maxim DS1621), JTAG header for connection of diagnostic tools
  • Processor: Freescale MPC85 Family
  • System Controller: Integrated within MPC8540

 

Applications

  • None Available

Aliases

  • None Available