ACT/TECHNICO Industrial Partner

MPC750FX - Emerson PrPMC 750FX Processor PMC Model PmPMC750f Simple Type:...

larger image

Request Quote
For Price
Part Number:
MPC750FX
Model Number:
MPC750FX
Make:
ACT/TECHNICO
Lead Time:
Available
Qty In Stock:
Available

Emerson PrPMC 750FX Processor PMC Model PmPMC750f Simple Type: PowerPC

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 128MB, 256MB, 512MB or 1GB ECC SDRAM in SODIMM package
  • 32/64-bit 33/66 MHz PCI with DMA
  • I2C interface
  • PowerPC 750FX processor running at 733MHz+
  • Processor PMC Monarch and Non-Monarch modes
  • RoHS/WEEE compliant configuration available
  • Three 10/100 Ethernet interfaces
  • Two serial I/O ports

Specifications

    General
  • Accessories: Development Mezzanine Card (DMC) Serial Cable User Manual
  • Compactflash: SDRAM 128MB, 256MB, 512MB, or 1GB SDRAM configurations with Error checking and Configuration (ECC) Modular and upgradable SODIMM packaging 133MHz operation (100MHz for 1GB configuration) Flash 16,32 or 64MByte flash configurations Organized as 2 banks- for protected field updateable image Flash Architecture NOR
  • Development Mezzanine Card: Optional plug-on card (side 2) to speed development Dual 10/100BaseTX ethernet ports via 2 RJ45 connectors RS-232 debug serial ports with cable to DB-9 connector Processor COP header for software development JTAG header for PCI bridge and on-card logic Four software readable configuration jumpers 32-pin PLCC socket for software development Single connector to attach to PMC module
  • DMA: 8-channel DMA support High-speed data movement between any module resources without significant CPU intervention
  • Ethernet: Three 10/100Base Fast Ethernet ports with access via P14 connector Two of the 10/100BaseTX Ethernet ports available during development via optional Development Mezzanine Card
  • I/O Capabilities: General Purpose Timers Eight 32-bit counter/timers 32-bit watchdog timer Real-Time Clock I2C LEDs and Switches 4 development user-programmable surface mount LEDs on PMC module 4development user-programmable surface mount LEDs on optional Development Mezzanine Card (DMC) Recessed front panel reset based
  • I²C: 2-wire independent bus Master or slave mode Access via P14 connector for end-user applications
  • PCI: 33/66MHz operation via Marvell Discoveru sytem controller 32/64-bit data path Monarch and Non-Monarch mode support (local host or peripheral) PCI 2.2 compliant
  • Physical Characteristics: PMC Formfactor: 149mm x 74mm Power supply: 3.3VDC Power dissipation 9W typical Operating range: 0 to 55C, 5 to 95% relative humidity (non-condensing)
  • Processor: PowerPC 750FX running at 733+ MHz 32-bit address bus, 64-bit data bus L1 cache 32K, 32-byte line, 8-way set, associative intruction and data cache Singe-cycle cache access 512K on-chip core speed L2 cache with ECC Floating-Point Unit (FPU)
  • Regulatory Compliance: UL/CSA 60950 IEC 950 Canada ICES-003 EN55022 FCC Part 15 NEBS Bellcore GR1089 NEBS Bellcore GR63 EN 300386
  • Serial Ports: Two RS-232 asynchronous serial ports Both ports available with access via P14 connector One of the ports available via bezel or one of the ports available during development via optional Development Mezzanine Card
  • Software Support: Monitor with power-on self test Board support package fo VxWorks Board support package for Linux Board support package for QNX
  • Spec Compliance: IEEE 1356.4 VITA 32 PCI 2.2

 

Applications

  • None Available

Aliases

  • None Available