VP315 - Act Technico VP315 CPU Board with 1.6 GHz or 1.1...
Request Quote
For Price
- Part Number:
- VP315
- Model Number:
- VP315
- Make:
- ACT/TECHNICO
- Lead Time:
- Available
- Qty In Stock:
- Available
Act Technico VP315 CPU Board with 1.6 GHz or 1.1 GHz Intel Pentium M Processor based Dual PMC Embedded Controller VITA 31.1 Compliant Simple Type: CPU Board
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 0.13 micron low power processor
- 1 Mbyte of secondary (Level 2) on-die cache
- 1 x 32-bit Long Duration Timer with processor interrupt capability
- 1.1 GHz uses mFC-BGA 479 (micro Flip-Chip Ball Grid Array) package
- 1.6 GHz uses mFC-PGA 478 (micro Flip-Chip Pin Grid Array) package
- 2 x USB 2.0 interfaces, one via P2 connector and one via optional P0
- 400 MHz Front Side Bus (FSB)
- 512 Kbytes of BIOS Flash EPROM
- 64 Kbytes of primary (Level 1) on-die cache
- 64 Mbytes Application Flash EPROM
- Intel Pentium M (ITP) debug port
- Intel Pentium M Processor operating at 1.6 GHz or 1.1 GHz
- Keyboard and mouse interfaces accessed via a 26-way high-density connector on front panel and optionally via P0 connector
- No CPU fan
- PC-compatible Real Time Clock (Year 2000 compliant)
- Support for VxWorks, Linux, Windows NT, Windows 2000, Windows XP, Windows XP Embedded, RTX, QNX, Solaris, LynxOS and MS-DOS
- Utilizes 64-bit Intel 855GME chipset
- Utilizes Intel 6300ESB I/O Controller Hub
- Watchdog timer
Specifications
- CPU: Intel Pentium M processor operating at 1.6 GHz or 1.1 GHz: 1.6GHz uses uFC-PGA 478 (micro Flip-Chip Pin Grid Array) package 1.1 GHz uses uFC-BGA 479 (micro Flip-Chip Ball Grid Array) package 64 Kbytes of primary (L1) on-die cache 1 Mbyte of secondary (L2) on-die cache 400 MHz Front Side Bus (FSB) 1.8 GHz processor version available no CPU fan utilizes 64-bit Intel 855GME chipset: supports 400MHz bus frequency utilizes Intel 6300ESB I/O controller hub ITP debug port
- Dimensions: supporting up to 1 Gbyte of 266 MHz DDR ECC SDRAM soldered on board single bit error protection; double-bit error detection accessible from processor or VME bus
- Environment: 0C to +55C (operating) 10% to 90% Relative Humidity, non-condensing (operating) -40C to +85C (storage) 10% to 90% Relative Humidity, non-condensing (storage)
- Ethernet: implemented by an Intel 82546GB LAN controller via 64-bit/66MHz PCI bus two interfaces supporting 10 Base-T, 100 Base-TX, 1000 Base-T: both interfaces accessed via optional P0 one channel switchable to front panel RJ45 support for VITA 31.1: Gigabit ethernet for VME64x backplanes
- Expansion Interface: +5V@3.3A (typical at 1.6 GHz with 512Mbytes DRAM) +12V@0A; -12V@0A +12V and -12V routed to both PMC sites and PMC expansion connector
- FDD: Phoenix BIOS comprehensive Power-On Self-Test (POST) LAN boot firmware included
- Form Factor: 64Mbytes application flash EPROM 512 Kbytes of BIOS Flash EPROM
- Gross Weight: implemented by an Intel 855GME GMCH host bridge providing: resolutions up to 2048x1536@75Hz up to 16M colors accessed via a 26-way high-density connector on front panel analog graphics interface supported via optional P0
- Keyboard/Mouse: supports up to Ultra-DMA 100 for high performance drives two channels (primary and secondary) primary channel is accessible via P2 connector: connects to an optional hard disk/flash/CD-ROM drive board secondary channel can be used for on-board disk drive or dual CompactFlash/Microdrive Type II drive carrier
- Memory: 6U form factor single VME slot- front panel width 0.8inch (20.3mm) utilizes 160-way DIN connectors for P1 and P2: compatible with normal 96-way DIN connectors optional P0 (optional for VME64x backplanes only) shock: 20g, 11ms, 1/2 sine (operating) 30g, 11ms, 1/2 sine (non-operating) vibration: 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating) 5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)
- OS: PC-compatible Real Time Clock (Year 2000 compliant) 2x USB 2.0 interfaces, one via P2 connector and one via optional P0 keyboard and mouse interfaces accessed via a 26-way high-density connector on front panel and optionally via P0 connector watchdog timer 1x32-bit Long Duration Timer with processor interrupt capability
- Power Connector: 2x PMC sites and for both sites: I/O via front panel, via P2 for site 1 and optionally via P0 for site 2 32/64-bit and 33/66 MHz PCI operation 3.3V or 5V PCI signaling expansion to optional dual PMC carrier board: using expansion connector (32-bit, 33 MHz) or using one baseboard PMC site (64-bit, 66 MHz)
- SATA: PCB (PWB) manufactured with flammability rating of 94V-0
- Serial: 3x serial channel interfaces 16550 compatible UART front panel access: 1x RS232 via a 26-way high-density connector rear panel access: 2x RS232/422/485, both via P2
- Serial: Serial ATA interface: one SATA port via P0 supports up to 150 Mbytes/s transfer rates
- Socket: support for VxWorks, Linux, Windows NT, Windows 2000, Windows XP, Windows XP Embedded, RTX, QNX, Solaris, LynxOS and MS-DOS
- Video Interface: implemented using Tundra Universe II device A32/A24/A16/D64/D32/D16D/D8(E0)/MBLT64 fast hardware byte swapping auto system controller detect full interrupter/interrupter handler support bus error interrupt hardware
Applications
- None Available
Aliases
- None Available